SCOPE OF ACCREDITATION TO ISO/IEC 17025-2005
ACCULAB INC.
9900Railroad Drive
El Paso, TX 79924
MECHANICAL
Valid To: June 30, 2012
Certificate Number: 2692.01
In recognition of the successful completion of the A2LA evaluation process,
accreditation is granted to his laboratory to perform the following tests
on polyurethane foam (flexible and semi-rigid), foam /fiberglass laminated
boards and foam / fabric laminated rolls:
|A| |B| |C| |D| |E| |F||G| |H| |I| |J| |K| |L| |M| |N|
|O| |P| |Q||R| |S| |T| |U| |V| |W| |X| |Y| |Z|
Adhesion
ASTM: D413 (A, B), D751 (50-53), D903
Chrysler LP-463LB-10-01
FLTM BN 151-05
GM3602M (3.5), GMW3220
HES D6506-00 (5.24)
MS: 300-31 (4.10), 300-32 (4.23.1)
NES 87000 NDS00
TSL: 2100G (4.39), 2105G (4.11), 5100G (4.5)``````````
Air Permeability
ASTM: D737, D3574 (G)
HES D6506-00 (5.17)
TSL: 2100G (4.6), 2107G (4.1)
Ball Rebound
ASTM D3574 (H)
ESX-83218 (4.15)
JIS K6400 (9.1.4)
TSM 7100G (4.7)
Bow and Skew
ASTM D3882
Chrysler LP-463KB-14-01
GMW3023
Breaking Strength
ASTM D751 (11)
Circular Modulus
TSL: 2100G (4.11), 2104G (4.8)
Cold Cracking
ASTM D1912
Chrysler LP-463KB-28-01 (Method A)
GM9140P
Cold Resistance
MS-AY 310 (3.3)
Color Fastness to Elevated Temperatures
GM2737M (6.2), GM9131P
Color Fastness to Light (Xenon)
AATCC 173
GMW3414
SAE: J1545, J1767, J2412
TSL: 2100G (4.28), 2106G (4.8)
Color Fastness to Rubbing (Crocking)
AATCC 8
FLTM BN 107-01 (Procedure A)
SAE J861
Compression Force Deflection
ASTM: D1621, D3574 (C)
BS 4443 (Part 2)
DIN: 53421, 53577
ESX-83218 (4.4/4.7)
GMI 60283 (Part 8)
Renault D41 1003
ISO 3386-1
TOP
Compression Set (Normal)
ASTM D3574 (D, J1, J2)
DIN 53572
ESB-M17H93-C2, C3, C4 (3.3.4, 3.4.9)
ESX-83218 (4.9)
FLTM BN 115-07
FNMN-LOS-ST-10-6-01E (4.7.6)
GMI 60283 (Part 4)
ISO 1856 (A)
JIS K6400 (7)
NES M0086 (8)
Renault D45 1046
TSM 7100G (4.8)
Conditioning
ASTM D3574 (Section 6)
GMW3221
Crease
GM9201P
TSL: 2100G (4.21), 2104G (4.9)
WSS: M8P3 (3.25.1), M8P18 (3.13.2)
Curling
GM: 2737M (5.9), 9330P
GMW: 4089, 4217 (5.3.7)
WSS: M8P3 (3.24), M8P18 (3.19)
Density
ASTM D3574 (A)
DIN 53420B
ESX: 62101 (4.3), 83218 (4.1)
FNMN-LOS-ST-10-6-01E (4.7.1)
GMI 60283 (Part 1)
HES D6506-00 (5.1)
ISO 845
JIS K6400 (5)
NES M0086 (4)
TSM 7100G (4.1)
Dimensional Stability
ASTM D2126
GMW4217
SAE: J315 (15), J883
TSL: 2100G (4.5), 2104G (4.5)
Environmental Aging
ASTM: D1735, D3574 (J1, J2, K)
Chrysler LP: 463KC-15-01, 463LB-12-01,
463LB-13-01
FLTM BO 12-01
GM: 9131P, 9200P, 9505P (Cycle M)
GMI 60283 (Parts 5-6)
GMW14124
ISO 2440
SAE J323
Fatigue (Flex Fatigue)
ASTM D3574 (I1)
Fiber Degradation
GMW3387
Flammability
CAL 117, Section A, Part I, Vertical Burn
CAL 117, Section D, Part II, Smoldering
TOP
Flammability, Horizontal Burn
ASTM D5132
DIN 75200
ESX-60410
FLTM BN 024-02
FNMN-LOS-ST-10-6-01E (4.7.7)
FMVSS 302
GM: 6090M, 9070P
GMW3232
HES: C206-99 (A), D6003-93
ISO 3795
MES CF 050E
MS 300-08
MS JP 9-4
NES M0094
SAE J369
TSM 0500G
TS 420-00-002
Flexibility
Chrysler LP-463LB-09-01
ESB: M2D243-A (3.3.8.2), M4D113-C (3.4.2)
FLTM BN 102-01 (Procedure A)
WSB M17H93-C8 (3.6.6)
Fogging
Chrysler LP-463DB-12-01
GM9305P
GMW3235
FNMN-LOS-ST-10-06-01E (4.7.9)
SAE J1756 (Photometric)
TSM 0503G
Heat Discoloration Resistance
NES 8700 NDS00 (12-1-1 (3))
WSS M8P18 (3.9.3)
Hydrolytic Stability
GM9231P
Indentation Force Deflection
ASTM D3574 (B)
ESX-83218 (4.8)
JIS K6400 (6)
NES M0086 (5)
SAE J815
TSM 7100G (4.2)
Inverted Bending Test
TSL: 2100G (4.44), 2104G (4.14); TS343-08-009-002 (6.25)
Load Height Change
ESB: M2D243-A (3.3.8.1), M4D113-C (3.4.1)
TOP
Mass Per Area
ASTM D3776
FLTM BN 106-01
GM2726M (3.3)
GM2737M (5.1)
GMW 3182
MS: 300-31 (4.1), 300-32 (4.2.1)
SAE J860
TSL: 2100G (4.1), 2104G (4.1)
Mildew Resistance
GM9128P
GMW3259
Moisture Uptake
MS 300-32 (4.3)
WSS M2D491-A1 (3.5.14)
Odor
ESB-M4D113-C (3.7)
ESX-62101 (4.9)
FLTM: BO 131-01, BO 131-03
GMW3205
SAE J1351
Ravel Resistance
GMW3217
Resistance to Blocking
GM2737 (5.14)
Seam Fatique
GMW3405
TSL: 2100G (4.17), 2105G (4.5)
Seam Strength
Chrysler LP-463KB-13-01
FLTM BN 119-01
GM9129P
MS: 300-31 (4.27), 300-32 (4.9.1)
TSL: 2100G (4.16), 2105G (4.4), 2106G (4.4)
Shrinkage
FLTM BN 105-01
Solvent Resistance (Cleanability)
ESB: M2D243-A (3.3.13), M4D113-C (3.10)
Chrysler LP-463KC-04-01
GM6291M (3.1.2)
MS-AY: 309 (Table 2), 310 (Table 2)
Staining
FLTM BN 103-01
GM9141P
SAE J2412
Stiffness / Softness
TSL: 2100G (4.45), 2104G (4.15); TS343-08-009-002 (6.26)
Stress Relaxation
TSM 7100G (4.4)
Stretch and Set
GMW3211
HES D6506-00 (5.5)
SAE J855
TSL: 2100G (4.9), 2104G (4.6), 2105G (4.2)
TOP
Taber Abrasion
GMW3208
MS: 300-31 (4.19), 300-32 (4.11)
SAE J948 (3)
TSL: 2100G (4.18), 5100G (4.12)
Tear Resistance
ASTM: D624 (Die C), D1117, D2261, D3574 (F),
D5587, D5733
GMW3326
ISO: 8067, 13937-2
JIS K6400 (11)
MS: 300-31 (4.9), 300-32 (4.7.1, 4.7.2)
NES M0086 (12)
TSL: 2100G (4.12), 2105G (4.3), 2106G (4.2, 4.3)
TSM 7100G (4.6)
Tensile Strength/ Elongation
ASTM: D3574 (E), D5034
DIN 53571 A2
ESX-62101 (4.4)
GMW 3010
ISO 1798
JIS K6400 (10)
MS: 300-31 (4.6, 4.7), 300-32 (4.4.1, 4.5)
NES M0086 (6)
TSL: 2100G (4.7), 2105G (4.1), 2106G (4.1)
TSM 7100G (4.5)
Thickness
ASTM: D1777, D1813, D3574 (8)
ESX: 83217 (4.3), 83220 (4.2.2)
ISO 5084
SAE J882
TSL: 2100G (4.47), 2104G (4.16), 5702G (6.4)
Water Absorption
SAE J315 (12)
Water Spotting
GM9133P
GMW14102
The laboratory is accredited for the test methods listed above. The accredited test methods are used in determining compliance with any material specifications included on this Scope; however, the inclusion of these material specifications on this Scope does not confer laboratory accreditation to the material specifications. Inclusion of these material specifications on this Scope also does not confer accreditation for every method embedded within the specification. Only the methods listed above on this Scope are accredited.
|
|
|